Well explained, fully understood. Many thanks for quick response.

 

Kind regards,

Arek

Hello. I have a very interesting issue regarding background decoding. After selecting the "Enable background decoding services" option, the server immediately begins decoding WSPR (which is the only mode I have selected) and sending spots to PSKReporter simultaneously on the 40m and 20m bands. What makes this particularly interesting is that my SDR profiles do not have the "Run background services on this device" option enabled, nor do I have a "Scheduler" configured. Decoding starts immediately upon checking the "Enable background..." option. I cannot understand why it specifically targets the 20m and 40m bands, or why it begins decoding and spotting straight away. I have three devices plugged to RPi4: one RTL and two Sdrplay's. The RTL profile covers only VHF/UHF; the first Sdrplay (RSP1) has profiles: 160m, 80/60m, 40m, 30m, ..., 6m; and the second Sdrplay (RSPa1) has profiles for 20m, 15m, and 10m. It is worth noting that the first profile on the RSP1 is 160m, while the first profile on the RSPa1 is 20m. The server is not open in a web browser. Thanks for any opinions and help to understand this ironically issue.

 

73

Arek