Brave Software ha annunciato il rilascio di Brave Origin, una nuova versione a pagamento di Brave browser pensata per gli utenti che non hanno bisogno di tutte le funzionalità che supportano Brave come azienda, ma desiderano comunque la privacy che Brave offre.
L'unione dei due mondi. Il nuovo BFGoodrich All-Terrain T/A KO3 completa il rinnovamento della gamma del brand del gruppo Michelin posizionandosi fra il più stradale Trail-Terrain T/A e l'ultra specialistico Mud Terrain T/A KM3. Promette, infatti, eccellenti doti in off-road senza comunque trascurare il confort su strada.Dopo averlo provato (a bordo di un Ineos Grenadier) fra rampe, guadi, twist e sterrati del circuito fuoristrada di Vairano, posso dire che la promessa è stata mantenuta: impressionante la disinvoltura con cui il sodalizio fra gomma e veicolo superi senza difficoltà anche le prove più impegnative, permettendo di fermarsi e ripartire anche sulle salite di terra più ripide e di non perdere mai grip su fango né su fondi rocciosi (per giunta bagnati).Al tempo stesso, in un giro su strada di una cinquantina di chilometri ne ho apprezzato la buona silenziosità nel rotolamento. Dote tutt'altro che scontata in una gomma così tassellata Com'è fatto Il nuovo BFGoodrich All-Terrain T/A KO3 (la sigla T/A sta per traction advanced, seguita da Key off-road 3) raccoglie il testimone del precedente KO2, migliorando del 15% la resistenza all'abrasione sui fondi sterrati e rocciosi e del 20% quella a tagli e strappi. Inoltre, la marcatura 3PMSF (che si aggiunge alla sigla M+S) certifica le prestazioni sulla neve. Per migliorare la resistenza all'usura i tecnici francesi hanno lavorato sia sulle mescole sia sul disegno del battistrada, in modo da distribuire in modo più uniforme le sollecitazioni. Inoltre, le sottili lamelle con struttura 3D resistono meglio alla deformazione, coniugando una maggiore robustezza alle spiccate doti di trazione. Per questo scopo, gli spigoli vivi della gomma, utili per fare presa su fango e neve, si ritrovano, oltre che nel disegno dei tasselli, anche sui fianchi. Robustezza aumentata Per migliorare la resistenza ai tagli è stata messa a punto una mescola specifica per i fianchi, mentre nel battistrada è inserita una tela di nylon e aramide, che si aggiunge a quelle di solo nylon o acciaio.Fra le scritte (impossibile non notare, grande e in bianco, il nome All-Terrain T/A KO3), se ne ritrova una che merita una spiegazione: Baja Champion. Richiama i trionfi di BFGoodrich nell'omonima gara sudamericana, fra le più severe al mondo parlando di off-road.Proprio dall'esperienza in questo tipo di competizioni il marchio francese ha attinto diverse tecnologie presenti nel nuovo BFGoodrich All-Terrain T/A KO3, che si può già acquistare in una delle 55 misure, da LT195/80R15 a 35x12.5R22LT: la sigla LT sta per light truck e deve essere ovviamente riportata anche nella carta di circolazione del veicolo (in alternativa, si può ritrovare una C).
Il gruppo Stellantis copre il 68% del fabbisogno elettrico dei propri stabilimenti in Europa con energia decarbonizzata, ossia prodotta con zero emissioni di CO2, senza bruciare combustibili fossili. In 27 siti produttivi sono installati impianti fotovoltaici che assicurano una capacità di oltre 500 MW: l'obiettivo, entro la fine di quest'anno, è di arrivare a raggiungere il 31% del fabbisogno energetico direttamente nei siti produttivi, con punte dell'80% in quelli più avanzati (Tychy in Polonia e Saragozza in Spagna). In questo modo, spiega il costruttore, gli impianti permetteranno di evitare l'emissione di oltre 100.000 tonnellate di CO2 all'anno. Ci sono anche le batterie In parallelo, Stellantis sta anche mettendo a punto sistemi di accumulo a batterie (BESS) in 20 stabilimenti europei, per una capacità totale di circa 200 MWh: sette di questi saranno operativi entro il 2026, con il completamento del programma previsto prima del 2030. Il mix energetico del costruttore comprende anche geotermia, biomassa ed eolico: il sito di Caen ha inaugurato lo scorso anno il primo impianto geotermico industriale di Stellantis in Francia, mentre Rennes, Sochaux, Trnava e Kragujevac adottano reti di riscaldamento a biomassa.
Ci sono due Le Mans. La prima è quella che milioni di appassionati vedono in televisione: le Hypercar che sfrecciano oltre i 330 km/h lungo le Hunaudières, i pit stop notturni, l'alba che arriva lentamente sulla Sarthe e una gara che da oltre un secolo misura velocità, resistenza e affidabilità. Poi ce n'è una seconda, molto meno visibile. quella che si muove dietro le porte dei motorhome, nelle hospitality dei costruttori e nei meeting tra fornitori e manager. qui che la 24 Ore di Le Mans è diventata la Davos dell'automobile. Un luogo dove non si confrontano soltanto piloti e squadre, ma anche strategie industriali, tecnologie e visioni del futuro. Per una settimana all'anno il centro dell'industria mondiale dell'auto si sposta nella Sarthe. Nel paddock si incrociano responsabili motorsport, designer, amministratori delegati, fornitori e partner tecnologici provenienti da tutto il mondo. Perché oggi Le Mans è uno dei rarissimi luoghi dove chi progetta, costruisce e vende automobili si ritrova faccia a faccia. Lo dimostrano i numeri del FIA World Endurance Championship. Nel 2026 sono 14 i costruttori impegnati tra Hypercar e LMGT3, con una presenza senza precedenti nella classe regina. Ferrari, Toyota, Porsche, Cadillac, BMW, Alpine, Peugeot e Aston Martin rappresentano da sole una parte significativa dell'industria automobilistica mondiale. E la crescita non sembra destinata a fermarsi. Genesis ha già annunciato il proprio ingresso tra le Hypercar, mentre McLaren è pronta a tornare nella classe regina dal 2027. Un segnale che conferma come l'endurance sia tornata a essere una delle piattaforme più attrattive dell'intero panorama automobilistico. Non è soltanto una questione di numeri. Ferrari arriva nella Sarthe da campione del mondo Costruttori, Toyota continua a rappresentare uno dei riferimenti tecnici della categoria, Porsche insegue il ritorno al vertice, mentre Cadillac, BMW, Alpine, Peugeot e Aston Martin utilizzano il palcoscenico di Le Mans per rafforzare la propria presenza globale. Attorno a loro ruota un ecosistema composto da centinaia di aziende che vedono nell'endurance una piattaforma di sviluppo e visibilità senza eguali. Qui si incontrano aziende che sviluppano software, produttori di componentistica, specialisti dell'elettronica, fornitori di pneumatici, gruppi energetici e marchi automobilistici che in alcuni casi competono in pista e collaborano su altri fronti industriali. L'endurance moderna è sempre meno una semplice disciplina sportiva e sempre più un ambiente dove si sperimentano tecnologie destinate ad arrivare sulle vetture di serie. Il miglior esempio di questa trasformazione arriva forse proprio dai fornitori. Bosch è oggi protagonista del sistema ibrido standard utilizzato dalle LMDh e contemporaneamente lavora su una delle possibili tecnologie del futuro: l'idrogeno. Il progetto Ligier JS2 RH2 (qui la nostra prova esclusiva in pista) sviluppato insieme a Maserati e Ligier Automotive racconta bene come Le Mans continui a essere un laboratorio nel quale sperimentare soluzioni che un domani potrebbero arrivare sulle vetture stradali. Lo stesso vale per il settore dei pneumatici. Michelin e Goodyear continuano a utilizzare l'endurance come banco prova per sviluppare coperture sempre più efficienti, resistenti e sostenibili, trasferendo poi molte di queste conoscenze alle vetture stradali. Anche la sostenibilità è ormai parte integrante della discussione. L'Automobile Club de l'Ouest ha avviato il programma Race to 2030, che punta a ridurre del 30% le emissioni di CO entro la fine del decennio, affiancando alle sfide sportive una crescente attenzione agli aspetti ambientali. Per questo oggi Le Mans non è soltanto il luogo dove si corre una delle gare più difficili al mondo. il luogo dove l'automobile prova a immaginare sé stessa. Tra i box si discute di elettrificazione, idrogeno, carburanti rinnovabili, software, intelligenza artificiale e nuovi modelli di business. Argomenti che spesso sembrano lontani dalla battaglia sportiva ma che, in realtà, ne rappresentano l'evoluzione naturale. Per 24 ore il mondo guarderà chi salirà sul gradino più alto del podio. Ma la vera partita che si gioca nella Sarthe è un'altra. Qui si incontrano concorrenti, fornitori, designer, ingegneri e manager chiamati a decidere come sarà l'automobile del prossimo decennio. per questo che Le Mans continua ad attirare nuovi costruttori, nuovi investimenti e nuove tecnologie. Perché nella Sarthe non si corre soltanto per vincere una gara. Si viene per capire dove sta andando l'automobile.
Preparations for Next Moonwalk Simulations Underway (and Underwater)
NASA’s X-59 eXternal Vision System shows Mach 1.077 on Friday, June 5, 2026, marking the aircraft’s first time reaching supersonic speed in support of NASA’s Quesst mission. The moment represents a milestone for the aircraft as it transitions to include test flights faster than the speed of sound.
NASA
NASA’s experimentalX-59 aircraft marked a major milestone Friday, June 5, when it flew faster than the speed of sound for the first time, setting the stage for demonstrating its quiet supersonic capabilities later this year.
NASA test pilot Jim “Clue” Less took off and landed at Edwards Air Force Base in California, reaching a top speed of approximately Mach 1.1 (713 mph) and altitude of 43,400 feet. The X-59’s flight began at 11:08 a.m. PDT and lasted 81 minutes, with the team focusing on flying qualities at both subsonic and then supersonic speeds.
In the coming days, we expect to take the next step and push to Mach 1.4
jared isaacman
NASA Administrator
”X-59 is getting ready for its quiet supersonic debut. Since the aircraft’s first flight on Oct. 28, 2025, the team has made tremendous progress, flying 16 times in the last 90 days and getting into a steady test rhythm. In the coming days, we expect to take the next step and push to Mach 1.4,” said NASA Administrator Jared Isaacman “I’m grateful to the NASA team and Lockheed Martin Skunk Works for their help getting us to this point, and I hope this is the first of many collaborations as we rebuild NASA’s X-plane portfolio.”
The X-59 is designed to fly at supersonic speeds while creating only a quiet thump instead of a loud sonic boom. For this flight, a NASA F‑15 chase plane flew nearby to monitor the X‑59. The loud sonic booms from the F-15 obscured any sound made by the X-59.
“The X-59’s first supersonic flight is a testament to America’s enduring leadership in science, engineering, and aerospace innovation,” said Michael Kratsios, Assistant to the President for Science and Technology and Director of the Office of Science and Technology Policy. “This achievement comes as the Trump Administration continues work to unleash supersonic flight and enable American ingenuity.”
This first supersonic flight is a significant milestone, but an event even more critical to the mission is upcoming. In just days, the aircraft is expected to make its first “mission conditions” flight, reaching a cruising speed of Mach 1.4 (925 mph) and altitude of approximately 55,000 feet. The X-59 also will be accompanied by a chase plane for this flight.
NASA’s X-59 quiet supersonic research aircraft completed its first supersonic flight Friday, June 5, 2026, marking the first time the aircraft exceeded the speed of sound in support of NASA’s Quesst mission. The milestone represents a major step in flight testing as the aircraft expands into the supersonic portion of its flight envelope.
NASA / Lori Losey
This speed and altitude are the base conditions for the X-59 when it will eventually fly over several U.S. communities enabling NASA to gather data about how people may perceive its quiet thump. NASA will share this data with U.S. and international regulators to help establish new data-driven noise standards to enable a future viable market for supersonic commercial flight over land.
For the last several months, the X-59 has been participating in an ongoing series of flights where the plane has been flying at a wide range of speeds and altitudes – a process known as envelope expansion. These tests are the first phase of the X-59’s flight testing. They are focused on performance and involve chase plane monitoring. When the aircraft completes this phase it will enter another, focused on its sound profile in order to verify its quiet thump capability.
The X-59 is the centerpiece of NASA’s Quesst mission, which aims to demonstrate quiet supersonic flight and help enable commercial supersonic flight over land worldwide. These advancements will help travelers reach their preferred destinations faster, spending less time in the air.
Through Quesst’s development of the X-59, NASA also will deliver design tools and technology for quiet supersonic airliners that will achieve the high speeds desired by commercial operators without disturbing people on the ground. NASA will validate design tools through ground and flight testing, providing U.S. aircraft manufacturers the ability to explore new quiet supersonic concepts, and provide them with confidence that their resulting designs will meet quiet flight requirements.
NASA’s X-59 quiet supersonic research aircraft completed its first supersonic flight Friday, June 5, 2026, marking the first time the aircraft exceeded the s...
By enabling digitized production design, this digital software is freeing up businesses and individuals across numerous industries to work smarter, not harder.
To design a new product or tool is often a lengthy, labor-intensive process. Even the most successful and streamlined physical design process is intensive and iterative by nature; it is the process of taking something that begins as little more than an idea and turning it into reality. Inherently, that is going to take a great deal of translation, as well as trial and error. When working with real-world, physical elements, this also makes for a costly endeavor, as each new trial effort may prove essential to the long-term success of the design, but still has adverse financial effects. Dassault Systèmes offers CAD software to help businesses stay on top of advancements in their industries.
Before digital design software became widely adopted, engineers and designers often relied heavily on hand-drawn technical sketches and manual drafting methods during product development. Revising a design could require redrawing entire sections of a project, making the process both time-consuming and resource-intensive. Modern digital design systems have significantly changed these workflows by allowing teams to make rapid adjustments, automate calculations, and store detailed design information within a single platform. This shift has contributed to the broader adoption of digital tools across industries seeking more streamlined development processes.
Fortunately, though, in this new world of ever-advancing technological tools, the design process doesn’t have to be fraught with issues and obstacles anymore, thanks to systems such as CAD software. This new software is now enabling businesses to design smarter, faster, and more accurately by digitizing product development processes and improving collaboration across engineering and manufacturing teams.
Digital Design as the Foundation of Innovation
Digital software allows engineers to create precise digital models that can then serve as the foundation for product development. Compare this to the physical alternative, which has long been a well-thought-out sketch of the product in question. Even the most comprehensive of sketches is only going to be dealing with two dimensions, and is likely to leave room for confusion or error based on the interpretation of the subjective rendering.
Garante privacy su ricorso Report La sentenza del Tar Lazio sull'istanza di accesso di Report conferma la correttezza dell'operato del Garante privacy, per tre dei quattro profili esaminati. Rispetto al quarto fornisce indicazioni - su cui l'Autorità...
Logos of organizations under the Addiction Recovery Care umbrella are on display at ARC’s career services office in Louisa, Kentucky. Ryan C. Hermens/Lexington Herald-Leader
Timmy G. Robinson Jr., founder and owner of what was once Kentucky’s largest drug addiction treatment company, was criminally indicted Thursday by a federal grand jury on charges of wire fraud and money laundering.
The indictment, filed in the Eastern District of Kentucky, charges Robinson with fraudulently selling millions of dollars of the same IRS tax credit to two companies. Robinson “devised a scheme” to “unlawfully enrich himself” by selling those tax credits to two parties, the indictment says. Robinson is also charged with two counts of money laundering for spending the proceeds of the fraudulent sale.
Robinson has resigned as CEO of ARC, company spokesperson Vanessa Keeton said Thursday. Robinson, 50, founded the company in 2012 after becoming sober and telling people he felt called by God to help people in the state with addiction.
ARC, which at one point operated more than 40 drug treatment centers around the state, has been under FBI investigation for Medicaid fraud since July 2024. That investigation is ongoing, the FBI confirmed on Friday. The Lexington Herald-Leader, in partnership with ProPublica, reported in April firsthand accounts from former ARC employees and clients who said they were told by ARC to falsely bill Medicaid, or witnessed others billing for services that were not actually provided. The company said at the time that it “has never knowingly or fraudulently billed Medicaid for services, and there is no evidence that the organization encouraged employees to falsify group notes for billing purposes.”
Robinson’s attorney, Kent Wicker, said he and his client were surprised to learn an indictment had been placed over a “dispute with some investors that is now pending in a civil courtroom.”
That dispute escalated earlier this year, when ARC was sued by two companies to which Robinson had sold IRS credits, including the Bahamas-based Angelica Capital Trust. But both companies allege that when ARC received the IRS credits, it illegally kept more than $8 million the companies were owed. They allege ARC was refusing to repay the money in part so it could pay a preliminary $28 million settlement with the Department of Justice over alleged Medicaid fraud. Robinson has said he would make payments to creditors upon the sale of the company, which he described in January as imminent.
“To be clear, Mr. Robinson did not defraud anyone, did not gain anything from the transaction at issue, and he has done nothing but deliver high quality care for over a decade to thousands of Kentuckians,” Wicker said in an emailed statement to the Herald-Leader and ProPublica. “We look forward to defending this case in court.”
Starting in 2023, ARC applied for two COVID-19-related tax credits, totalling nearly $7 million.
In July 2025, Robinson sold the rights to the first tax credit to a loan company, the indictment says. Under the agreement, the purchaser would pay ARC $2.7 million in exchange for a future repayment of the tax credit once the IRS funds arrived. Robinson signed that agreement, and later that month the buyer wired ARC the agreed amount.
Soon after, the indictment says, Robinson “devised a scheme” to sell that same credit amount to a second company and in doing so “falsely represented” that the $2.7 million in initial tax credit was available to purchase. “Robinson concealed the prior transactions” to the new buyer, according to the indictment.
In November, Robinson signed an agreement with the second buyer, who sent a wire transfer that included $2.7 million for the twice-sold tax credit.
In December, when the IRS paid ARC the COVID-19 tax refunds, “at Robinson’s direction, ARC spent the ERC [Employee Retention Credit] funds on other operational costs and debt obligations,” the indictment reads.
Keeton declined to comment further on the case, citing pending litigation. However, she said ARC continues to operate normally.
“All facilities, programs, and services remain open and fully operational,” Keeton said in an emailed statement. “Our leadership team, employees, and clinical staff remain committed to delivering high-quality care and support to the individuals and families we serve.”
Robinson faces 20 years in prison and a $250,000 fine, or twice the gain or loss, for the wire fraud count. Each money laundering count carries up to 10 years in prison and a $250,000 fine.
We’re taking a closer look at how ARC treated the people who came to the organization seeking help with their sobriety. If you’re a current or former client or employee, we want to hear from you.
CDL FELIX Asti - Via XX Settembre 112 Asti (giovedì, 11 giugno 17:00)
Come ogni giovedì, il CDL sarà aperto dalle 17 alle 20 nel cortile di via XX settembre 112. Birra fresca, giornali, libri in prestito, consultazione e vendita!
Abbiamo un sacco di nuovi arrivi, passate a trovarci!
The North Carolina legislature, where Democrats recently introduced three bills to reform the state’s courts and protect the separation of powers between its branches of government Al Drago/Bloomberg via Getty Images
Democratic lawmakers in North Carolina introduced a trio of constitutional amendments this week aimed at protecting traditional powers of the state’s governor and reforming oversight of its court system.
The effort was prompted in part by ProPublica’s reporting, including an investigation that found that over nearly a decade, Republican lawmakers had pushed through law after law shrinking the powers of North Carolina’s governor, always a Democrat during that time.
At a press conference on Wednesday, the bills’ sponsors readily acknowledged that the initiatives are unlikely to pass, at least in the current legislative session: Republicans hold majorities in North Carolina’s House and Senate.
But in proposing the measures as changes to the state constitution, the group of eight Democrats said their goal was to make them less vulnerable to the persistent partisan warfare that has engulfed the narrowly divided swing state.
Republicans “won’t always be in the majority,” said Rep. Phil Rubin, the primary sponsor of one bill. “And when they’re not, they’re going to suddenly think these are great rules. So let’s do them now.”
Republican leaders in the House, Senate and court system did not respond to requests for comment on the bills.
Experts have long maintained that Republican power grabs have thwarted the will of North Carolina voters, removing the Democratic governor’s control or partial control over numerous boards, entities and executive prerogatives and leaving him the nation’s weakest. (Republican officials have defended the shifts, pointing out that voters also elected a GOP legislative majority.)
Rubin’s measure would bar the legislature from stripping away additional gubernatorial powers, as well as block majority leaders from what he called “government by ambush” — springing major legislation on the minority and public without notice.
“ProPublica’s reporting shows the perils of not having this law,” Rubin said. Voters should have “the opportunity to secure their constitution, demand absolute transparency in lawmaking and ensure that people, not backroom deals, have the final say.”
The two other constitutional amendments unveiled this week target aspects of the judicial system.
The first, authored by House Rep. Marcia Morey, would make disciplinary hearings and sanctions by the courts’ internal watchdog, the Judicial Standards Commission, public.
GOP rules currently cloak the commission’s work in secrecy. Behind closed doors, ProPublica revealed, the majority-Republican state Supreme Court quashed the commission’s recommendations that two Republican judges who’d admitted to committing egregious conduct violations be publicly reprimanded. (Spokespeople for the North Carolina Supreme Court and the Judicial Standards Commission declined to comment or respond to a detailed list of questions about the matter.)
Morey’s bill would also change who appoints the commission’s members, a step she called critical to preventing the “weaponization” of its work.
Currently, Republican legislative leaders and Paul Newby, the state’s conservative chief justice, appoint a majority of the commission’s members. As ProPublica has reported, in 2023 Newby encouraged the commission to investigate a Black Democratic justice who’d criticized his decision to effectively shut down a racial equity commission. (Newby, as well as spokespeople for the court and the Judicial Standards Commission, declined to comment for the story.)
Morey’s measure would divide commission appointments equally among the chief justice, the governor and the North Carolina State Bar. “Who makes decisions about discipline and who appoints the decision-makers,” she said, are critical to making the system “fair and effective.”
The second bill, sponsored by Rep. Deb Butler, would disqualify state Supreme Court justices from hearing cases in which family members are parties. Justice Phil Berger Jr. has caused controversy by ruling in multiple cases in which his father, the leader of the state Senate, is a defendant in his legislative capacity. (Berger referred recusal requests on these cases to the Republican majority on the Supreme Court, which ruled he could participate.)
Butler’s measure would also compel justices to disclose more information about large stock transactions, outside sources of income and sponsored travel. A ProPublica investigation found Newby didn’t disclose a trip to a luxurious Hawaiian resort, paid for by a conservative judicial education program. Newby and court spokespeople did not respond to requests for comment about his decision not to disclose the trip.
Butler described her bill as an effort to restore public trust. “People deserve complete confidence in the integrity of their court,” she said.
In the unlikely event that the bills pass, the public would then have the chance to vote on them in November. If not, the sponsors said, they’d revive them in the next session, by which time even some Republican strategists think that a blue wave may have flipped the North Carolina House.
“We’re committed to following through on these bills to ensure fairness and impartiality in our courts and legislature,” Morey said. “This should be the norm, not the partisan bias we have now.”
Il Movimento Nonviolento Sardegna, per l’estate 2026, organizza e propone 3 seminari presso la Casa per la Pace di Ghilarza: Gandhi conflittologo nonviolento – seminario-laboratorio condotto da Salvatore Deiana: da venerdì 3 a domenica 5 luglio. Approcci nonviolenti ai conflitti – il metodo Transcend e il metodo dell’Equivalenza a fianco e insieme, condotto da Salvatore [...]
Dopo il terremoto di magnitudo Mw 6.1 (ML 6.2) avvenuto il 2 giugno 2026 al largo della costa calabra nord-occidentale, sui social media sono comparsi numerosi commenti che mettevano in relazione questo evento sismico con il vulcano sottomarino Marsili.
Batimetria del Tirreno Meridionale e localizzazione del vulcano Marsili (da Gennaro et al., 2023). Vedi il post su INGVvulcani.
La domanda è comprensibile: sia il terremoto sia il vulcano si trovano infatti nella stessa area geografica, il Tirreno meridionale. Ma cosa ci dicono i dati scientifici?
Un terremoto molto profondo
Il primo elemento da considerare è la profondità del terremoto. In Italia la maggior parte dei terremoti avviene a profondità crostali (nei primi 10-20 km). Tuttavia, a causa dei fenomeni geologici che hanno portato alla sua attuale configurazione, alcune aree della nostra penisola sono interessate anche da terremoti intermedi e profondi, fino a 600 km. L’evento del 2 giugno è avvenuto a una profondità di circa 250 chilometri, che è eccezionalmente elevata rispetto alla maggior parte dei terremoti che avvengono in Italia.
I terremoti profondi sono tipici delle zone di contatto tra placche oceaniche e continentali. Il terremoto del 2 giugno, come altri, ha infatti avuto origine in un particolare contesto geodinamico, che chiamiamo zona di subduzione, dove la placca tettonica del mar Ionio sprofonda nel mantello terrestre, al di sotto dell’arco calabro e del mar Tirreno.
Schema generale di una zona di subduzione e dei terremoti che vi si generano (da INGVterremoti).
Il Mar Ionio, infatti, rappresenta il relitto di un antico grande oceano che occupava la regione del Mediterraneo e che è stato “subdotto” e in parte riassorbito nel mantello terrestre per decine di milioni di anni prima sotto le Alpi e poi sotto gli Appennini.
Il Marsili, come tutti i vulcani, anche se di notevoli dimensioni, è invece una struttura superficiale, sviluppata nella crosta terrestre e alimentata da processi geodinamici che interessano la parte superiore, più esterna, del mantello. Il Marsili si è formato a seguito dell’estensione, dell’assottigliamento della successiva lacerazione della crosta che forma il fondo marino Tirrenico. Ciò ha permesso la formazione di fratture utilizzate dal magma per risalire ed eruttare verso la superficie. Tra la zona in cui si è generato il terremoto e il vulcano, esiste quindi una distanza di centinaia di chilometri in profondità.
Un forte terremoto può innescare un’eruzione?
Un’altra domanda frequente riguarda la possibilità che un terremoto di grande magnitudo possa “risvegliare” un vulcano, in questo specifico caso il Marsili.
È vero che, in alcuni casi, terremoti con magnitudo molto elevata possono produrre variazioni nello stato di sforzo della crosta e influenzare temporaneamente sistemi vulcanici già prossimi ad una fase eruttiva. Ci sono numerosi studi che mirano a capire se la variazione di sforzo generata da un terremoto possa innescare un’eruzione. Le conclusioni non sono univoche, ma la possibilità che un terremoto possa perturbare un sistema vulcanico diminuisce molto rapidamente con la distanza e dipende da numerosi fattori. In primo luogo la magnitudo, ma anche le caratteristiche delle strutture geologiche (geometria e cinematica) relativamente alla posizione del vulcano e del suo sistema di alimentazione, e lo stato del sistema magmatico.
Nel caso dei terremoti profondi del Mar Tirreno, la sorgente sismica si trova a centinaia di chilometri di distanza, a causa dell’elevata profondità del terremoto, rispetto agli apparati vulcanici sottomarini. Per questo motivo, non esistono evidenze scientifiche che eventi come quello del 2 giugno possano innescare direttamente un’eruzione del Marsili o degli altri vulcani sottomarini dell’area.
In sintesi
Il terremoto del 2 giugno 2026 e il vulcano Marsili, anche se localizzati nella medesima area geografica, appartengono a contesti geologici diversi e sono espressione di processi geodinamici differenti.
Il terremoto è associato alla deformazione della litosfera ionica in subduzione sotto l’arco calabro, mentre il Marsili appartiene al sistema di apertura ed estensione di un nuovo bacino che consente la risalita di magmi del Tirreno meridionale.
Sebbene si trovino nella stessa regione del Mar Tirreno, alla luce delle conoscenze scientifiche attuali, la grande distanza tra il terremoto e il Marsili suggerisce che il terremoto non sia stato causato dal vulcano. Inoltre, la moderata magnitudo del terremoto non può perturbare il sistema di alimentazione del Marsili, innescando qualche tipo di attività.
A year after America’s first spacewalk, Gemini IX-A Eugene Cernan stepped outside his spacecraft for an ambitious extravehicular activity scheduled for 167 minutes. The challenges he faced led NASA to reevaluate plans, equipment, and training for future spacewalks.
Cerchio di autocoscienza sulle condizioni materiali e la migrazione
giardini reali - cso san maurizio angolo via rossini (mercoledì, 10 giugno 19:15)
Ciao, ci vediamo per la prossima assemblea che sarà dedicata al nodo tematico sulle condizioni materiali e la migrazione.
Ci confrontiamo insieme con una cerchia di autocoscienza, useremo la pratica dell' albero sia all' inizio che alla fine della cerchia per entrare meglio in sintonia con la nostra emotività.
Abbiamo deciso di farla ai Giardini Reali, porta repellente e telo; non dimenticare di portare qualcosa di vegano da condividere!
La cerchia sarà non mista e, quindi, non aperta a persone non terrone e a uomini etero cis.
Vieni con noi, padroneggia la grande arte del clowneggiamento ribelle e della cospirazione approssimativa :O)
Cos'è Clown ARMY?? È una tecnica di piazza spontanea e autogestita nata con l'intento di inviare messaggi irriverenti e gestire i nostri colleghi delle forze dell'ordine.
Lanciamo una grande campagna di arruolamento aperto a tutt*, che più siamo meglio è!
Ci vediamo ogni secondo e quarto mercoledì del mese nella palestra del mani, a cui lasciamo un contributo volontario per le spese.
Ogni incontro alterniamo allenamento di tecniche improbabili e ridicole da usare in piazza e discussioni deliranti in cui ci rilanciamo le idee pazze a vicenda.
LA CLOWN ARMY CERCA ✨TE ✨
MA ESSENDO FORZA DEL (DIS)ORDINE NON RIESCE A TROVARTI
RENDILE IL LAVORO FACILE E UNISCITI A LEI DIRETTAMENTE grazie
Quando:
Mercoledì 14 gennaio
dalle 20.30 alle 22.30
Dove:
Al CLIM (Manituana), in Largo Maurizio Vitale 113 To)
Je viens de créer un sondage de date avec (la nouvelle mouture de) Framadate.
J’ai utilisé l’option “Appliquer les mêmes horaires à toutes les dates” et j’ai mis des horaires.
Mon sondage se retrouve avec les horaires que j’ai choisi mais aussi avec une option “journée” que je n’ai absolument pas rentrée. Qu’est-ce qui quoi ?
Frattamaggiore, provincia di Napoli, 2 giugno 2026. Un ragazzo di diciassette anni si riunisce con due amici, di diciannove e ventidue anni, a casa sua. Qualcuno (uno dei maggiorenni, secondo gli inquirenti), ha acquistato online dall’Olanda una sostanza gelatinosa color ambra, contenuta in un vasetto, e i tre ne assaggiano, ingerendolo, un cucchiaino. Pochi minuti …
AI worms, or "viruses with wings and brains," adapt to new environments, seek out vulnerabilities, and will likely strike within a year, researchers say.
Cai Qi, the fifth-ranked member in the Communist Party’s hierarchy, has been picked to head the Central Party School, the top training ground for cadres.
Cai, 70, sits on the elite Politburo Standing Committee and is secretary of the party’s secretariat as well as director of the party’s general office.
Responsible for daily operations of the party’s nerve centre, Cai is often referred to as President Xi Jinping’s chief of staff.
His new post at the party school means that he will also oversee...
Scade il 31 ottobre 2026 - Un'opportunità concreta per sostenere la formazione dei giovani universitari del territorio pratese. La Fondazione Scuole Cattoliche Fiora e Gianni Biti ha pubblicato ufficialmente il nuovo bando di concorso per l'anno accademico 2026-2027, mettendo a disposizione 3 borse di studio destinate a studenti meritevoli e in condizioni economiche disagiate. L'iniziativa punta ad abbattere le barriere economiche, premiando l'impegno e il merito di chi si appresta a iniziare il proprio percorso accademico.
Scade il 31 ottobre 2026 - Un'opportunità concreta per sostenere la formazione dei giovani universitari del territorio pratese. La Fondazione Scuole Cattoliche Fiora e Gianni Biti ha pubblicato ufficialmente il nuovo bando di concorso per l'anno accademico 2026-2027, mettendo a disposizione 3 borse di studio destinate a studenti meritevoli e in condizioni economiche disagiate. L'iniziativa punta ad abbattere le barriere economiche, premiando l'impegno e il merito di chi si appresta a iniziare il proprio percorso accademico.
Quest'anno i fondi raccolti finanzieranno una borsa di dottorato triennale in Medicina Traslazionale, focalizzata sull'assistenza ai pazienti più vulnerabili, alle vittime di violenza e al disagio sociale. Come parte della comunità dell'Università di Firenze, sappiamo bene quanto la ricerca scientifica sia il motore del cambiamento e del benessere collettivo. Per questo motivo, vogliamo rilanciare con forza la nuova campagna per la destinazione del 5x1000 a UniFi, un gesto completamente gratuito che quest'anno si trasforma in un investimento concreto per la salute umana e l'inclusione.
Quest'anno i fondi raccolti finanzieranno una borsa di dottorato triennale in Medicina Traslazionale, focalizzata sull'assistenza ai pazienti più vulnerabili, alle vittime di violenza e al disagio sociale. Come parte della comunità dell'Università di Firenze, sappiamo bene quanto la ricerca scientifica sia il motore del cambiamento e del benessere collettivo. Per questo motivo, vogliamo rilanciare con forza la nuova campagna per la destinazione del 5x1000 a UniFi, un gesto completamente gratuito che quest'anno si trasforma in un investimento concreto per la salute umana e l'inclusione.
Nel panorama iper-competitivo di oggi, il marketing digitale non può più basarsi solo sull'intuizione. Richiede dati certi, metodologie rigorose e una comprensione profonda dei contesti competitivi in continua evoluzione. È proprio qui che si inserisce il cuore pulsante di WeM_Park: la ricerca.
Nel panorama iper-competitivo di oggi, il marketing digitale non può più basarsi solo sull'intuizione. Richiede dati certi, metodologie rigorose e una comprensione profonda dei contesti competitivi in continua evoluzione. È proprio qui che si inserisce il cuore pulsante di WeM_Park: la ricerca.
As a society, our reliance on technology has never been greater. From banking and shopping to remote work and healthcare, we have access to information in an instant. As good as technology is at helping us with daily tasks, it also comes with risks.
Cybersecurity is no longer a concern for IT departments in a business. It is a necessity for both businesses and individuals to stay protected online. As our use of technology continues to grow, so too does the sophistication and frequency of cyber threats. From financial fraud and identity theft to large-scale data breaches, the risks are real and becoming more common.
With data breaches and security threats becoming more frequent, sophisticated, and on a larger-scale, building a secure digital defence is a top priority for everyone.
The Rising Tide of Online Threats
Australia faces an unprecedented wave of cyber incidents every day. In the 2024–25 financial year, the Australian Signals Directorate’s Australian Cyber Security Centre (ACSC) responded to over 1,200 cybersecurity incidents alone. A staggering 11% increase from the previous financial year. With attackers becoming more organised, better funded, and highly strategic in who they target.
Financially motivated attacks (scams) are the number one cyber-attack, with ransomware and cyber extortion now among the most common cyber incidents responded to by security firms. Industries such as financial services, healthcare, and critical infrastructure are becoming prime targets for hackers.
Now, with the rise of artificial intelligence, AI-powered threats are making it a global issue. Phishing emails generated by AI, deepfakes, and attacks that evolve to evade detection are becoming commonplace.
Your Data is the New Currency Online
Data is one of the most valuable assets in the dark corners of the web, where a single click on a malicious link can compromise entire systems. For businesses, this includes customer information, intellectual property, and financial records. For individuals, it’s personal identity, communications, and digital footprints.
A data breach can have serious consequences, and businesses face legal penalties, regulatory scrutiny, and a loss of customer trust that can take years to rebuild, if at all. In Australia, compliance with privacy laws such as the Privacy Act 1988 means businesses have a legal obligation to protect personal information.
For individuals, compromised data can lead to identity theft, unauthorised transactions, and long-term financial harm. The emotional toll should not be underestimated either. Recovering from cybercrime can take a long time to get over.
Cyber Security as a Business Priority
Business leaders must prioritise cyber security and see it as an investment rather than an added cost. An investment in cybersecurity not only protects data and assets but also increases business credibility and customer confidence.
Many modern businesses are using cloud-based systems, remote work environments, and integrated technologies. While these innovations offer incredible flexibility and efficiency, they also introduce new vulnerabilities. Without proper safeguards in place, these systems can become entry points for attackers.
Implementing cybersecurity into company culture is essential. This includes providing regular staff training, setting up strong access controls, and maintaining up-to-date security systems.
A master of cybersecurity offers advanced knowledge and real-world experience. This course gives qualified staff the skills they need to protect digital assets and keep networks secure.
Steps to Stay Safe Online
Both individuals and business owners can take important steps to strengthen their cybersecurity.
For Individuals:
Enable multi-factor authentication (MFA) everywhere possible and use authenticator apps over SMS for stronger protection
Keep software and systems updated
Use strong, unique passwords managed by a password manager, and avoid reusing credentials
Regularly back up important data and test recovery processes
Educate family members, particularly the elderly, on recognising phishing, social engineering, and safe online habits
Implement basic technical controls, such as firewalls, endpoint detection tools, and encryption for sensitive information
Develop and test an incident response plan so you can react quickly if something goes wrong
Review privacy settings on social media and be cautious with unsolicited requests for information
For Businesses:
Conduct regular security audits and risk assessments
Train employees to recognise and respond to cyber threats
Implement firewalls, encryption, and endpoint protection
Develop an incident response plan to minimise damage in the event of a breach
By implementing these steps, and being aware of the risks online, you can significantly reduce your chances of falling victim to a cyber-attack.
The Future of Cyber Security
Cybersecurity is no longer the stuff of science fiction; it is an integral part of modern life. As technology evolves, so too does the frequency and sophistication of cyber threats. While developing technologies like artificial intelligence, the Internet of Things (IoT), and blockchain offer exciting opportunities, they also present new security challenges that individuals and businesses must be prepared to face.
Whether you are running a business or managing your personal online presence, the need for data protection and security systems has never been greater. This makes ongoing education and skill development essential.
Cybersecurity specialists are in high demand, and the industry offers rewarding employment opportunities for those with the necessary skills and qualifications.
Kia amplia la gamma del PV5 Passenger (già Van of the Year 2026) introducendo una nuova versione a sette posti, adatta alle esigenze tanto delle famiglie numerose quanto di taxi, navette aeroportuali e transfer. Gli ordini per questo modello apriranno nella seconda metà dell'anno, quando verranno anche comunicati i prezzi per il mercato italiano. La Casa coreana amplierà la propria gamma di veicoli elettrici con l'introduzione del PV7 nel 2027 e del PV9 nel 2029. Fuori è grande uguale Invariate le dimensioni dell'EV5 a sette posti: il van coreano è lungo 4.695 mm, largo 1.895, alto 1.869 e ha un passo di 2.995 mm. I sedili sono disposti su tre file (con lo schema 2-2-3), una ridotta altezza di accesso (399 mm) e porte scorrevoli su entrambi i lati, per agevolare l'accesso di tutti i passeggeri. Nella configurazione a sette posti il bagagliaio ha una capacità di 318 litri, che diventano 785 abbassando gli schienali della terza fila. Non cambia neppure la posizione di guida, con il quadro strumenti digitale da 7,5", abbinato a un infotainment da 12,9", su cui installare app di terze parti tramite lo store Pleos. Quasi 400 km di autonomia La piattaforma su cui è costruito il PV5 è la E-GMP.S per mezzi commerciali, con il pavimento piatto (che migliora l'abitabilità per i passeggeri). Il motore ha una potenza di 120 kW (163 CV) e 250 Nm di coppia, ed è abbinato a una batteria da 71,2 kWh, che secondo la Casa permette di percorere 392 km (l'omologazione Wltp è in corso). La ricarica in corrente continua supporta potenze fino a 150 kW, per passare dal 10 all'80% in meno di 30 minuti. Di serie anche la funzione V2L per alimentare dispositivi esterni.
L'abbiamo già vista su strada, ma la Skoda Peaq non è ancora stata presentata ufficialmente. In attesa del debutto fissato per il 23 giugno, la Casa ha mostrato i bozzetti della vettura, svelando gli ultimi dettagli di stile che caratterizzano la nuova Suv. Design Modern Solid e dimensioni da ammiragliaLa Peaq è l'ammiraglia elettrica della Skoda: una Suv a 7 posti da 4,88 metri, con 2,96 metri di passo. Dal punto di vista del design, esalta i concetti del Modern Solid, la filosofia stilistica che sta progressivamente cambiando tutta la gamma Skoda. Coerente con gli altri modelli elettrici ed endotermici, la Peaq ha forme scolpite e personali, con gruppi ottici dalle forme originali e la mascherina Tech-Deck di nuova generazione, rifinita in nero lucido. innovativo il layout del montante posteriore, abbinato ad una soluzione specifica for il cristallo fisso posteriore. L'abitacolo non è stato ancora completamente svelato, ma sono già stati mostrati i sedili e la Casa sottolinea, in particolare, il grande spazio garantito dalla piattaforma elettrica. Le informazioni tecniche e l'autonomiaGià complete le informazioni tecniche: la Skoda proporrà la Peaq in versione a motore singolo e doppio con potenze comprese tra 204 e 299 CV e batterie da 63 e 91 kWh, per autonomie di oltre 600 km e ricariche 10-80% in meno di 30 minuti.
Ravi de découvrir une alternative libre à Tricount, que j’utilise depuis quelques années mais dont la dérive commerciale récente ne me plaît guère.
J’ai donc testé Framacount, et me permets les trois souhaits d’amélioration suivants :
1. Dans l’onglet “statistiques”, pouvoir visualiser non seulement mes dépenses (en tant qu’utilisateur actif), mais également celles de tous les participants (afin de pouvoir communiquer à chacun le coût total pour lui de l’activité réalisée). L’idéal serait un tableau donnant le coût pour chacun(e).
2. Permettre de saisir des dépenses réglées par plusieurs personnes. Exemple : un groupe de 10 personnes, nous allons au restaurant, la note s’élève à 532 €. En fonction des espèces dont chacun dispose, 4 personnes mettent chacune 100 €, la cinquième 132 € (indépendamment de la répartition ultérieure, je ne parle ici que du paiement). Actuellement dans Framacount il faut saisir 5 dépenses séparées, fastidieux.
3. Dans les “catégories” de dépenses, il manque le thème “Hébergement” (Hôtel, location d’appart, etc.).
Merci d’avance
Can it get any worse? 😭 ►►► Submit your videos for the chance to be featured 🔗 https://www.failarmy.com/pages/submit-video ▼ Follow us for more fails! https://linktr.ee/failarmy
Catch all our shows streaming today ➝ https://www.failarmy.com/pages/watch-live
FailArmy is the world’s number one source for epic fail videos and hilarious compilations. We’re powered by fan submissions and feedback from all around the world, with over 69 million fans across digital platforms! From our team to you all, thank you for your support 😊
To license any of the videos shown on FailArmy, please visit Jukin Media at http://bit.ly/jukinlicense
Il grande evento gratuito di divulgazione scientifica firmato OpenLab dell'Università di Firenze. Da giugno a settembre, laboratori, mostre, cinema e spettacoli animano la città metropolitana con un focus speciale sul tema dell'anno: "L'Intelligenza". C’è un momento dell’anno in cui i laboratori universitari aprono le porte ai cittadini e la scienza si trasforma in un'esperienza visiva, tattile e interattiva.
Il grande evento gratuito di divulgazione scientifica firmato OpenLab dell'Università di Firenze. Da giugno a settembre, laboratori, mostre, cinema e spettacoli animano la città metropolitana con un focus speciale sul tema dell'anno: "L'Intelligenza". C’è un momento dell’anno in cui i laboratori universitari aprono le porte ai cittadini e la scienza si trasforma in un'esperienza visiva, tattile e interattiva.
Lo Sportello AKIS (Agricultural Knowledge and Innovation System) della Regione Toscana, attivo presso la Fondazione PIN, è una vera e propria "porta d'accesso" concepita per connettere il mondo della ricerca scientifica e tecnologica direttamente con il lavoro delle aziende agricole toscane.
Lo Sportello AKIS (Agricultural Knowledge and Innovation System) della Regione Toscana, attivo presso la Fondazione PIN, è una vera e propria "porta d'accesso" concepita per connettere il mondo della ricerca scientifica e tecnologica direttamente con il lavoro delle aziende agricole toscane.
Ci sono tanti video che spiegano quant'e' facile fare da soli il cambio dell'olio e del filtro olio sulla propria auto, specialmente in relazione alle auto Vintage.
Ma e' veramente cosi' facile?
Beh, se siete come me, alti ed ingombranti, probabilmente NO.
Probabilmente vi si aprira' davanti un ABISSO DI FATICA ED ORRORE.
ECCO la dura VERITA'!!!
*OCCHIO al mio AMAZON SHOP! https://www.amazon.it/shop/asbestomolesto*
*Le mie attrezzature le trovate nel mio negozietto AMAZON:*
Queste sono tutte cose che USO GIORNALMENTE e di cui sono molto soddisfatto :)
*TRASMETTITORE RADIO AM* : https://it.aliexpress.com/item/1005005593010774.html
*Antenna MINI WHIP* : https://amzn.to/4aDnnHx
*ALTRA ANTENNA MINI WHIP*: https://amzn.to/43NHReh
*Ricevitore SDR*: https://amzn.to/3TLirJR
*Ricevitore radio XHDATA D-808* : https://amzn.to/3xQzYbZ
*Display Voltmetro 0-30Vdc* : https://amzn.to/3xepanL
*XHDATA D-808* radio onde corte AM/FM/Airband/ETC: https://amzn.to/43EutZS
*Evaporust* : https://amzn.to/3xaNRBy
*Caricabatterie solare* USB etc: https://amzn.to/43Cn39D
*Rotelle per sedia* : https://amzn.to/49kSrKZ
*Le mie attrezzature VEVOR ed i codici per acquistarle con sconti:*
CODICE DI *SCONTO 5%* su tutti i prodotti VEVOR: VVGDS5
*Termocamera infrarossi* VEVOR SC240N: https://s.vevor.com/bfQsoD
*Pulitrice ad ultrasuoni* VEVOR da 10 litri: https://s.vevor.com/bfQgEk
*Telecamera endoscopica* VEVOR 5 metri 3 telecamere: https://s.vevor.com/bfQbze
*BRAKLEEN pulitore freni* : https://amzn.to/3VGjgX0
*Cavo adattatore da OBD2 a OBD 3 pin* : https://amzn.to/43I4zUY
*Cavo diagnostico OBD per PANDA 141* ed altre auto storiche: https://amzn.to/3xiD9co
*Adattatore Da Attacco H4 HS1 A H5 R2 G40* : https://amzn.to/4cAByPf
*Lampade Philips RacingVision GT200 H4* per Panda 141: https://amzn.to/3xipx0O
*Imbottitura sedile panda 141 seduta* : https://amzn.to/4cAMLPT
*CINEBASTO Riscaldatore DIESEL* 8KW VEVOR BLUETOOTH lo trovate qui:
DALL' ITALIA site https://s.vevor.com/bfQYmP BLUETOOTH!!!
EUROPA site https://s.vevor.com/bfRpdd BLUETOOTH!!!
GERMANY site https://s.vevor.com/bfRpdk BLUETOOTH!!!
CODICE DI SCONTO VVS10 RISPARMIA 10€ !!!
Se vi interessa il VEVOR, , guardate la serie completa!
PARTE 1: https://www.youtube.com/watch?v=A9xgrcAC4_8
PARTE 2: https://www.youtube.com/watch?v=mwhiqrgUQck
PARTE 3: https://www.youtube.com/watch?v=LVSfAheBhYk
PARTE 4: https://www.youtube.com/watch?v=9DlC6uSOrno
PARTE 5: https://www.youtube.com/watch?v=hdMPFVHCf7w
PARTE 6: https://www.youtube.com/watch?v=yjk9LYeo7dI
_In qualità di Affiliato Amazon io ricevo un guadagno dagli acquisti idonei: aiuterete il canale a crescere!_
Sotto la metro, ormai non sono più furti bensì rapine, ogni giorno che passa qualcuno finisce in ospedale perchè si è ribellato alle borseggiatrici e spesso chi gli mette le mani addosso è minorenne, nonostante continuiamo a segnalare attivamente la presenza dei borseggiatori e attraverso i video informiamo decine di migliaia di persone ogni giorno, il problema resta anche se molto diminuito e dato che le persone iniziano a riconoscere i borseggiatori, gli ultimi rimasti non si fanno problemi ad usare la violenza.
pour favoriser le covoiturage au sein de notre association, nous voulons mettre en place une carte (Framacarte) localisant les membres.
Seulement, pour la simplicité d’usage, la carte comportera l’adresse précise et le numéro de téléphone de chaque membre. Nous voulons évidemment garder ça en privé au sein de l’association (même si on connaît les limites de cet aspect “privé”, mais c’est assumé).
Est-ce possible ?
Si oui, comment cela se passe pour l’accès à la carte ? Un simple mot de passe ?
North Dakota state Rep. Eric Murphy at home planning a day of canvassing in his Grand Forks district. Murphy, an incumbent Republican, faces a contested primary election from conservative challengers after he introduced a bill to expand abortion access last year. Dan Koeck for ProPublica
If Eric Murphy loses his primary election on June 9, he believes he already knows one reason why.
Last year, the North Dakota state representative, a Republican, tried to expand the window of pregnancy in which women could access abortion. The state legislature had banned it for almost everyone from the moment of conception.
Tied up in court, the ban hadn’t yet gone into effect. But Murphy wanted to lock in a less restrictive law, making abortion accessible up to 15 weeks and even later for women whose doctors deemed it a medical necessity.
To convince his fellow legislators, he read out loud from two ProPublica stories about women in Texas who died without lifesaving care. “Physicians felt compelled to follow the law,” he said in a hearing, “and both women died so that an inane law could be followed.”
A conservative colleague had warned him not to file the bill, Murphy told ProPublica, recalling the man’s words: “I can no longer protect you from who’s going to come after you.”
There was some truth to that sentiment.
At least four Republican state lawmakers who challenged severe abortion restrictions lost support from anti-abortion groups and key party allies and went on to lose primary elections, ProPublica found.
The blueprint in those races was remarkably similar. Opponents either embraced stricter abortion policies or avoided the issue altogether. Anti-abortion organizations campaigned against the incumbents, party endorsements shifted to their opponents and activists worked to turn out voters in low-participation primary elections.
In some of the races ProPublica examined, lawmakers who replaced abortion-ban reformers went on to support even stricter abortion legislation. In South Carolina, for instance, two new senators supported a bill to eliminate almost all exceptions to the state’s abortion ban. One provision of the bill would send women convicted of illegally terminating their pregnancies to jail.
Murphy is one of at least two Republican state lawmakers now facing a contested primary after trying to modify their states’ abortion restrictions. Richard Briggs, a state senator from Tennessee, is also fighting to keep his seat. In 2019, Briggs voted for the state’s so-called trigger law — a ban that would snap into place if the federal right to abortion was ever overturned.
But he had second thoughts after that actually happened. A cardiothoracic surgeon, Briggs realized the newly activated law didn’t provide adequate protections for patients having medical complications. “As a medical doctor, I drew the line,” he said in an interview. He introduced bills for a clearer medical exception and protection for doctors who intervened in cases where a fatal fetal anomaly risked the mother’s health.
The latter bill failed and now serves as ammunition for the challenger vying for his seat in the state’s Aug. 6 primary. “My opponent consistently works to weaken Tennessee’s pro life laws,” Kent Morrell says on his campaign website, noting that Tennessee Right to Life had revoked its endorsement of Briggs.
Murphy, who teaches biomedical sciences at the University of North Dakota’s medical school, ultimately did not succeed at reforming the state’s ban. His bill failed 87-6, and the state Supreme Court later reinstated the original ban, which forbids abortion from conception, with exceptions for rape and incest up to six weeks and to save the life of the mother.
Murphy discusses campaign issues with retired teacher Deb Stahlberg at her home in Grand Forks.Dan Koeck for ProPublica
The first time Murphy ran for election, his county’s Republican Party had endorsed him. Not this time. Instead, the party endorsed his two challengers, including Jill Chandler, the executive director of a “crisis pregnancy center” who believes abortion should be banned from conception.
She told ProPublica she happened to be present in the committee room when Murphy made the case for his bill. “To know that he was an endorsed Republican candidate from my district and one that I had voted for because of that endorsement was eye-opening,” she said. “I remember thinking, ‘This can never happen again.’”
It was not the first time either Briggs or Murphy had taken positions that aggravated members of their parties in legislatures that have taken sharp turns to the right. Murphy voted against book bans and private school vouchers. Briggs had urged the public to get COVID-19 shots and has said that medical expertise should trump politics in decisions that involve public health.
Briggs expressed confidence in his election chances; he feels that voters agree with the decisions he’s made and noted that his Republican colleague, Sen. Becky Duncan Massey, survived a primary challenge over her support for abortion-ban exceptions.
Murphy believes the “silent majority” supports the intent of his abortion bill, but primary races historically have low turnout. It could come down to a handful of votes, he said.
“I might lose an election over this,” Murphy said, “but would I rather win an election by not doing the right thing?”
The Fallen Reformers
As a Republican state representative in Louisiana, Mary DuBuisson sought legislation that would make sure victims of rape and incest could terminate their pregnancies, and she also sponsored a bill that would have allowed women whose pregnancies were not viable to end them. She ended up losing a primary runoff.Melinda Deslatte/AP Photo
Mary DuBuisson, a former state Republican representative in a suburb outside of New Orleans, considers herself passionately “pro-life.” Like Briggs, she voted for her state’s near-total abortion ban in 2019. Three years later, just before Louisiana’s trigger law was implemented, it came before the legislature again.
Recognizing that women would now have to live under the restriction, DuBuisson wanted to make sure victims of rape and incest could terminate their pregnancies. When her colleagues refused to include those exceptions, she became the only Republican to vote against the ban.
A year later, she caused a stir when she sponsored a bill that would have allowed women whose pregnancies were not viable to end them. “To force a woman to carry to term with zero chance of survival is heartless and cruel,” she said at the time.
She didn’t feel it would be controversial. Other Republican women in the House told her she was doing the right thing. But when it was time to vote, another female Republican state lawmaker made a motion that ultimately succeeded at killing the bill in committee. “I mean, I just couldn’t understand,” she said of all her colleagues. “What if this was you, your daughter or granddaughter?”
When she came up for reelection, her primary opponent latched onto her record. Brian Glorioso was an attorney she had handily defeated in 2018. He called her proposed legislation a leftist attempt to circumvent the state’s abortion ban and said any “pro-abortion” doctor would falsely deem a pregnancy nonviable in records just to perform the procedure.
She beat him in the Oct. 14, 2023, primary by 384 votes — not enough to avoid a runoff.
Then, he got some extra support.
On Oct. 16, Louisiana Right to Life told its followers this runoff was key. Glorioso was expected to have a 100% “pro-life” voting record, while DuBuisson’s was 77%.
On Oct. 27, the state’s new governor-elect, Republican Jeff Landry, endorsed him, citing issues other than abortion; he wouldn’t tell ProPublica whether DuBuisson’s record on it played a role. But Landry, who had defended the state’s ban as attorney general, made clear during his campaign that he was “an unwavering defender of life, especially in the face of adversity,” citing his 100% rating from a national anti-abortion group.
“I think it partially cost me my election,” DuBuisson said of her attempts to reform the ban.
History repeated itself the following year, this time in South Carolina.
Three state senators — all Republicans who consider themselves “pro-life” — worked across party lines to defeat an abortion bill that essentially banned the procedure from conception and eliminated rape and incest exceptions. At the time, the state allowed abortion up to 20 weeks.
Sens. Sandy Senn and Penry Gustafson spoke out against limitations on abortion access for victims of rape and incest. Sen. Katrina Shealy, who had the longest tenure for a woman in the state legislature, pushed for making abortion accessible up to 12 weeks and later for exceptions in cases involving rape, incest and fatal fetal anomalies. Ultimately, a six-week window with rape, incest and fatal fetal exceptions became law.
South Carolina state Sens. Sandy Senn, left, Katrina Shealy, center, and Penry Gustafson, right, show off model spines they received from Students for Life Action with a message to “get a backbone” and vote to ban abortion at six weeks. The three, nicknamed the “Sister Senators,” ended up losing their reelection bids.Jeffrey Collins/AP Photo
Amid the Statehouse showdown, they were nicknamed the “Sister Senators.” All lost their county GOP’s endorsement to their male opponents.
But the bigger repercussions came from anti-abortion groups that mobilized a multifront grassroots campaign against them. Students for Life Action announced that it generated “37,000 pieces of mail, almost 130,000 personal text messages, more than 51,000 phone calls and thousands of doors knocked” to unseat the trio.
“All three of them got voted out — every single one of them lost because of that decision,” said Dr. Matthew Clark, the executive director of Personhood South Carolina, which believes abortion shouldn’t exist at all and that women who have them should be prosecuted for murder.
Clark, an allergist and Presbyterian pastor, said his group’s desired legislation has a better chance to advance now that the Sister Senators have been replaced.
Matt Leber, who beat Senn, previously co-sponsored a bill as a member of the state House that would make abortion a crime equivalent to homicide. It failed to advance, and Leber withdrew his name as a co-sponsor amid a controversy surrounding it in 2023.
This legislative session, Leber and Carlisle Kennedy, who beat Shealy, supported a bill that carries misdemeanor criminal penalties for women seeking abortions, with jail time up to two years. Senate Bill 1095 passed with supermajority support out of a committee Leber sits on.
The bill died before the session, but watchers of abortion restrictions noticed it got further than any other similarly repressive legislation ever has.
A Fateful Disconnect
Murphy speaks to a voter in Grand Forks.Dan Koeck for ProPublica
The outcomes do not neatly match public polling. Surveys in states such as South Carolina and Louisiana have found that many Republican voters support at least some exceptions to abortion bans, including in cases of rape or threats to a woman’s health.
But primary elections often draw only a small share of eligible voters, giving outsized influence to highly engaged activists and organized interest groups.
DuBuisson’s runoff drew about one-third of registered voters. Participation in the South Carolina primaries was lower still. Some races were decided on tiny margins; Senn lost hers by 33 votes.
North Dakota is one of the few states with a multimember system, where two representatives and one senator govern together in the same district. District 43, which Murphy currently represents, is one of the only purple districts in an otherwise deeply red state. It includes part of Grand Forks, a growing college town home to the University of North Dakota.
Murphy’s fellow representative, Democrat Zac Ista, told ProPublica he hadn’t been able to make a dent in this legislature. He announced he wouldn’t be seeking reelection, opening up an opportunity for a Republican takeover of the district.
Ista said the lack of support rallying around Murphy is due to his position on abortion, as well as culture-war legislation he refused to support. “I think it’s illustrative of that schism, where at this district level, Republicans are really trying to sort of press the most extreme conservative opinions,” Ista said.
Richard Glynn, the GOP county chair in Murphy’s district, had previously supported Murphy’s abortion bill. In written testimony, Glynn shared his experience hearing about young women performing illegal abortions when he was a freshman at the University of South Dakota in 1966. Four young women who were in sororities died from using metal hangers to terminate their pregnancies, he wrote.
“These deaths were viewed as preventable if these girls could have received competent care. Unfortunately, North Dakota is going down the same path with limited access to obstetric care that negatively impacts the health of the woman,” his letter said.
When reached by phone, Glynn said delegates in the county voted and Murphy had the least amount of votes, which is why he did not receive the county’s endorsement.
Glynn declined to answer more questions before hanging up on a reporter.
One of Murphy’s opponents, Mike Holmes, has drawn a lot of excitement — and an endorsement from Gov. Kelly Armstrong — for his expertise in energy technology and industrial development. The governor said Holmes understands “what it takes to keep North Dakota’s economy strong.” Holmes has been silent on abortion and didn’t respond to ProPublica’s requests for an interview.
Chandler, who touted her “respect for life” in a campaign mailer, is favored among anti-abortion groups. “It’s a pretty stark contrast,” said Bridget Turbide, executive director of North Dakota Right to Life, who called Murphy’s proposal “the most extreme pro-choice bill we’ve ever seen.”
A flyer promoting Jill Chandler, one of Murphy’s opponents, was paid for by Citizens Alliance of North Dakota, a conservative group that opposes abortion among other causes.Photo courtesy Eric Murphy
Citizens Alliance of North Dakota, a conservative group that opposes abortion among other causes, paid for a mailer calling Chandler a “champion of family values.” The same group marked Murphy in “bad standing” in an online roster of legislators, questioning his alignment with North Dakota values.
Murphy’s third colleague who also represents District 43, Republican State Sen. Jeff Barta, campaigned alongside him in 2022 as part of a unified Republican ticket when the primary election was uncontested.
Asked about the upcoming race and the candidates, Barta pointed to Murphy’s proposal that would have expanded abortion access in North Dakota.
“Last session, he introduced House Bill 1488, which created a little divide there,” Barta said.
Barta said Murphy has also broken with the party on other issues.
“That probably opened the door for the third candidate to run,” Barta added. Had that not happened, Murphy would have made it to the general election without having to defend his spot on the ballot.
Before the Supreme Court overturned Roe v. Wade in 2022, lawmakers taking such nuanced stands on abortion bans may not have risked a career death sentence, said abortion historian and law professor Mary Ziegler.
“The kind of incrementalism that Eric Murphy seems to be doing is something from a bygone era, where people were more pragmatic in the movement and not punished for it,” she said.
A NIST-led team has created a new AI model that can identify safe evacuation routes in a single-story floor plan during a fire, with a multilevel version in the works.
NIST also improved how X-rays are used to study the atomic structure of metals in real time during 3D printing, allowing researchers to observe how materials change under extreme conditions.
Proseguono i ribassi per i prezzi alla pompa di benzina e diesel, mentre anche le quotazioni dei prodotti raffinati tornano a scendere con forza. Arrivano, dunque, segnali positivi dall'andamento dei listini dei carburanti, ancor di più in vista della scadenza del taglio delle accise.A tal proposito, Staffetta Quotidiana, nella sua consueta rilevazione gionaliera, segnala il cambio di passo del governo dopo alcuni giorni in cui si è andata rafforzando l'ipotesi di uno stop allo sconto o comunque di una sua rimodulazione per privilegiare le fasce di popolazione più deboli. In particolare, nel pomeriggio di ieri 4 giugno il ministro dell'Economia Giancarlo Giorgetti ha annunciato un nuovo intervento tramite il ricorso al meccanismo dell'accisa mobile. L'ipotesi delle accise mobili In particolare, è prevista l'emanazione di un decreto ministeriale sabato 6 giugno, quando scadrà lo sconto di 6,1 centesimi sulla benzina e di 12,2 centesimi sul gasolio. Per ora non si sa quale possa essere l'entità e la durata del nuovo taglio perché si può ricorrere alle accise mobili solo dopo la prima settimana di ogni mese, quando viene contabilizzato l'extra-gettito dell'Iva prodotto dai rincari. "Dobbiamo effettivamente valutare quant'è la disponibilità, e per motivi tecnici lo sapremo solo sabato, e le condizioni di mercato, per capire come prolungare lo sconto", ha spiegato Giorgetti.In caso di mancato intervento, Staffetta calcola che con le accise piene il prezzo medio della benzina salirebbe a 1,987 euro/litro, quello del gasolio a 2,106 euro/litro. Le rilevazioni giornaliere Tornando alle rilevazioni giornaliere, questa mattina 5 giugno la benzina self service sulla rete stradale è a 1,926 euro/litro (-4 millesimi rispetto a ieri) e il gasolio a 1,984 euro/litro (-4). Il Gpl è a 0,794 euro/litro (-2), il metano a 1,562 euro/kg (invariato). In autostrada, la benzina self è a 2,023 euro (-5), il diesel a 2,068 euro (invariato), il Gpl a 0,906 euro (-1) e il metano a 1,584 euro (invariato).In tale contesto, la testata specializzata segnala anche la decisione dell'Eni di ridurre di due centesimi al litro i prezzi consigliati della benzina. IP, invece, ha optato per un ribasso di due centesimi sul gasolio. Q8 ha tagliato di 3 centesimi la verde e di 4 il diesel. Quanto ai dettagli per modalità di vendita, elaborati sulla base di quanto comunicato ieri dai gestori degli impianti all'Osservatorio del Mimit, le medie dei prezzi praticati sulla rete stradale e autostradale vedono la benzina self service a 1,932 euro/litro (compagnie 1,934, pompe bianche 1,930) e il diesel a 1,990 euro (compagnie 1,993, pompe bianche 1,985). Al servito, benzina a 2,071 euro (compagnie 2,110, pompe bianche 1,999), diesel a 2,131 euro (compagnie 2,171, pompe bianche 2,054), Gpl a 0,803 euro (compagnie 0,812, pompe bianche 0,793), metano a 1,562 euro/kg (compagnie 1,561, pompe bianche 1,563), Gnl a 1,453 euro/kg (compagnie 1,459 euro/kg, pompe bianche 1,448 euro/kg).Lo spaccato dei marchi principali mostra Eni a 1,934 euro sulla benzina self service (2,143 il servito) e 1,987 sul gasolio (2,199); IP a 1,940 (2,108) e 2,002 (2,171); Q8 a 1,930 (2,101) e 1,993 (2,169); Tamoil a 1,919 (2,000) e 1,980 (2,067).
From governance and policy to AI and research, RIPE 92 sparked lively discussion across the community. The RIPE Chair Team reports on the sessions, the ideas and the initiatives that stood out during the week.
I legami della nuova Audi Nuvolari con il mondo della Formula 1 sono tanti, dal propulsore ibrido all'aerodinamica, dal carbonio della carrozzeria fino alla scelta dei colori. Non è un caso che la nuova supersportiva dei Quattro anelli sia stata presentata nei giorni che precedono il Gran Premio di Monte Carlo. "Con l'Audi Nuvolari portiamo su strada l'emozione pura e la performance", ha dichiarato Gernot Döllner, ceo della Casa tedesca. " un'auto che rivela come intendiamo sviluppare per il futuro il nostro 'All'avanguardia della tecnica'". I piloti di F1 l'hanno già guidata Al reveal ufficiale dell'auto, insieme a Döllner, al responsabile del design Massimo Frascella e a tutto il top management dell'azienda, erano presenti anche i piloti della scuderia Audi Revolut F1 Team, Nico Hülkenberg e Gabriel Bortoleto, che durante lo sviluppo della Nuvolari sono stati direttamente coinvolti. E che si sono detti impressionati dalla vettura: "in particolare tutto l'insieme, il feeling dell'auto, la precisione con cui risponde, il connubio tra performance e guidabilità", ha spiegato Hülkenberg. "Quello che colpisce immediatamente è la pulizia e la precisione della risposta dell'auto in ingresso di curva, con un bilanciamento neutro e affilato, che ti fa sentire tranquillo nel tenere la velocità in curva", ha aggiunto Bortoleto.
Se fino a ieri un utente Linux all'interno della Powershell di Microsoft Windows si sarebbe sentito frastornato, con la pubblicazione di Coreutils for Windows le cose cambiano.
È infatti possibile avere comandi Linux nativi in Windows.
Il punto è: ce n'era davvero bisogno?
Polvere d’argento. Il potere di Zerak: l’epic fantasy italiano che conquista tra multiversi, avventura e crescita personale Un epic fantasy coinvolgente che vi lascerà senza fiato Polvere d’argento. Il potere di Zerak, romanzo fantasy di Alessandra Dell’Amico, è una lettura capace di sorprendere fin dalle prime pagine. Quello che inizialmente sembra un racconto ancorato alla quotidianità si trasforma rapidamente in un’avventura epica ambientata in un universo parallelo oscuro, affascinante e costruito con grande attenzione ai dettagli. Fin da subito, la trama riesce a catturare l’attenzione grazie a una combinazione efficace di mistero, tensione narrativa e personaggi credibili. Inoltre, il worldbuilding
G
li anni Venti del Ventunesimo secolo sembrano vivere un lungo e a tratti stanco post Novecento, là dove la letteratura contemporanea italiana tenta più che di rinnovare il proprio linguaggio, di inseguire stilemi passati recuperandone, e a volte con più o meno fortuna reinterpretandone le forme. All’interno di questa dinamica diviene fondamentale il ruolo che la letteratura ha assunto negli ultimi anni, da un lato meno centrale, ma non per questo più periferico nel momento in cui le forme di narrazione si moltiplicano dando luogo a una frantumazione del discorso che si declina a tratti in maniera specialistica, ma spesso anche in maniera superficiale non riuscendo più a indagare nel profondo il carattere dell’umano e del suo tempo. Nell’ambito di quella che può essere dichiaratamente definita come una crisi ha un ruolo sicuramente il ritorno al genere che ormai accompagna da decenni il nuovo secolo, quindi tutto il filone della letteratura gialla e noir e poi i romanzi storici che però non sempre mantengono la promessa di una visione critica e postmoderna, ma il più delle volte si risolvono all’interno di un romanticismo un po’ posticcio e un po’ troppo didascalico, per quanto efficace sui banchi delle librerie.
Si stacca da questa tendenza una letteratura di recupero che ricerca nel Novecento le radici di un discorso e le reinterpreta in chiave contemporanea, una letteratura che non nega le origini storiche e culturali e prova a ridefinirle con uno sguardo dell’oggi. A questo ipotetico filone partecipano autrici come Rosella Postorino, Raffaella Romagnolo, Marta Barone e Nadia Terranova e non è da meno Silvia Dai Pra’, che con Brillare (2026) offre ora uno dei più interessanti esempi di una narrativa italiana capace di recuperare la storia del Novecento per portarne i segni, le ferite e le tracce nei nostri giorni. Si deve infatti a libri come Brillare la capacità di offrire non una banale e fittizia soluzione, ma uno sguardo ampio e inclusivo di fronte a fatti che fanno parte della storia più drammatica dell’Italia, come le terribili pagine del nazifascismo, che molte volte non hanno trovato una verità storica e giuridica a causa di una connivenza che ha preferito alla giustizia un paludoso e ambiguo quieto vivere.
Brillare offre ora uno dei più interessanti esempi di una narrativa italiana capace di recuperare la storia del Novecento per portarne i segni, le ferite e le tracce nei nostri giorni.
Brillare parte da una storia partigiana, quella di una militanza comunista nella Resistenza, quella di un padre che scompare nel nulla e di una mattanza nazifascista che ha lasciato sul campo settantasette morti nel paese (tutto letterario) di Greto, un piccolo centro splendidamente isolato sulla Alpi Apuane: “Da noi nessuno veniva a spaccare le lapidi o a disegnarci sopra le svastiche, come succedeva da altre parti: e vorrei pure vedere, dicevano gli uomini, e si ficcavano le mani in tasca, ma si intuiva che muovevano le dita come se le stringessero attorno a un collo”.
La protagonista, Bianca, figlia di Argo, si ritrova nuovamente al paese dove è nata, ma da dove è scappata, fuggita in cerca di fortuna, di una carriera, di una professione che la potesse portare lontano, là dove i desideri di una Repubblica liberata sembravano dover portare i figli di quella che è stata la Resistenza. Le cose non sono andate come si credeva e come si voleva, il precariato e una nuova povertà diffusa ‒ seppur mascherata da molta tecnologia ‒ si è piano piano rivelata nelle poche occasioni disponibili e nei troppi disservizi di uno Stato sempre più fragile e mal funzionante.
Bianca ritorna a Greto costretta dalle poche opportunità che la vita le ha concesso e dagli errori che non riesce mai per davvero a perdonarsi: torna a casa ‒ là dove non avrebbe mai voluto essere ‒ da sconfitta e da fallita.
Bianca torna però anche da e per Viola, la sorella che dopo la morte della madre ha deciso di autosegregarsi in casa, annullando ogni possibilità di vita e di felicità. Bianca ripensa alle sue scelte, a una relazione ora in parte abbandonata e lasciata appesa a un filo come panni ad asciugare. Lui è rimasto a Firenze come la possibile carriera accademica di Bianca, ovviamente sempre precaria. I ricordi le si sovrappongono, c’è la sua infanzia e c’è la mitologia, quella di Argo, ma nel mezzo ecco il regno della madre ovvero quello della cura che ora sembra mancare a lei come a sua sorella, al paese di Greto come a tutta l’Italia.
Brillare è un romanzo che ha nel suo cuore la necessità di ritrovare il tempo della cura e di metterla in pratica come forma contemporanea di lotta con cui arginare la violenza di un capitalismo sempre più preoccupato delle cose e mai delle persone.
Brillare è infatti un romanzo che ha nel suo cuore la necessità di ritrovare il tempo della cura e di metterla in pratica in una quotidianità capace di abbattere ogni differenza sociale, ogni distanza tra la provincia e la città. La cura è la forma contemporanea di lotta con cui arginare la violenza di un capitalismo sempre più preoccupato delle cose e mai delle persone. Greto ovviamente rivela tutti i ganci e i grovigli di una provincia faticosissima, fatta di rimpianti, occasioni mancate e di una povertà sentimentale quanto economica, ma è proprio per quella sua posizione magica sulle Alpi fatte di roccia dura che Greto si offre come una base perfetta per ogni ripartenza.
“Le donne, sul nostro monumento ai caduti, avevano sempre quella strana espressione vagamente fuori luogo, un’espressione tra l’orrore e l’orgasmo”: lo sguardo di Silvia Dai Pra’ è dissacrante, ma mai ingenuamente cinico, coglie l’ironia dei tempi e la loro tragedia perché ne è pienamente all’interno. L’autrice sviluppa così una comunità di personaggi che si moltiplicano pagina dopo pagina, un vero paese di caratteristi, ognuno con il suo ruolo, ognuno con una storia da raccontare. Romanzo intimo che si fa voce corale, Brillare coglie i tempi e la loro inevitabile fatica, lo fa con irriverenza e anche con la durezza di chi si sta giocando tutto della vita. Ecco allora i tipi strani, le madri accudenti e anche chi la strada l’ha persa per sempre e chi invece non si è mai curato di cercarne una diversa.
Bianca si ritrova immersa in quella che è stata la sua infanzia e che ora le mostra la faccia adulta di un tempo tanto tragico quanto comico. La narrazione intreccia gli anni universitari le scelte fatte ma ancora cariche di dubbi e le scorribande in paese. Due mondi che improvvisamente appaiono più affini di quanto potesse mai immaginare prima Bianca, come se l’assenza dalle cose, la scomparsa delle persone improvvisamente offrissero un panorama più chiaro e definito: “Ma ero così sicura di quello che facevo che non vedevo l’ora di saltare su un regionale perché mi riportasse verso Massa, di correre nel piazzale della stazione per infilarmi nella macchina di Orlano, di sentire il brivido che si prova accanto a un corpo che ci attrae, di rilassare i muscoli sul sedile del passeggero, come se solo lì potessi smettere di stare all’erta”.
L’autrice sviluppa una comunità di personaggi che si moltiplicano pagina dopo pagina, un vero paese di caratteristi, ognuno con il suo ruolo, ognuno con una storia da raccontare. Romanzo intimo che si fa voce corale, Brillare coglie i tempi e la loro inevitabile fatica.
La fuga non appare più come una sconfitta, ma come l’inseguimento della libertà e dei propri desideri. Ecco che improvvisamente quello che si voleva un tempo si rivela essere solo quello che volevano gli altri. Una cosa imposta da poca fantasia e da molte costrizioni e anche dalla paura di finire come molti a vivere da adolescenti consunti i propri trenta, quaranta e magari anche cinquanta anni e così fino alla morte. Brillare è il romanzo di un’esplosione, di un ritorno: non al paese, non alla provincia e alla sua vita démodé e non agli amori dell’infanzia, ma alla pratica della liberazione. Un ritorno a sé stessi e ai propri desideri che passa da quella lotta quotidiana che richiede non di superare gli altri, ma di prendersi sempre cura del prossimo.
I titoli di oggi: Pechino apre al dialogo sulle sovvenzioni ma respinge le accuse OCSE Xi atteso in Corea del Nord dall’8 al 9 giugno Afghanistan e Russia firmano accordo militare Pechino vieta l’ingresso a quattro deputati neozelandesi dopo una visita a Taiwan Censura in Cina per il 4 giugno mentre Pechino respinge le critiche su Tiananmen Pechino vieta l’ingresso ...
Dopo più di trent’anni dalla pubblicazione originale nel 1994, esce finalmente per Add Editore, nella traduzione di Silvia Pozzi, l’opera più nota della scrittrice queer Qui Miaojin: I taccuini del coccodrillo. Con la pubblicazione de I taccuini del coccodrillo, Add Editore porta finalmente in Italia uno dei testi fondamentali della letteratura taiwanese contemporanea e della narrativa queer asiatica: Notes of a ...
Un gruppo cybercriminale di lingua cinese fino a poco tempo fa concentrato prevalentemente sul mercato asiatico sta ampliando rapidamente il proprio raggio d’azione verso Europa e Africa. Secondo le analisi pubblicate da Proofpoint, il gruppo chiamato TA4922 ha aumentato sensibilmente il volume delle proprie operazioni nel corso del 2026, prendendo di mira organizzazioni nel Regno […]
For CIA analysts was provided some intel about Iran preparing to do a nuclear test, we pressure test the claims in this video. Check out Larrys website here https://sonar21.com/
Get the gear I use here
Use discount code FINALSIXTY for 60% off all remaning inventory
https://canadianpreparedness.com/
GET EMERGENCY PRESCRIPTION MEDS AND ANTIBIOTICS (affiliate link)
https://jasemedical.com/canadianprepper
GET WHOLESALE FREEZEDRIED FOOD (World reknown quality) USE DISCOUNT CODE 'CanadianPrepper'
https://tinyurl.com/nhhtddh6
The GNOME project continues refining one of its most frequently used applications: GNOME Files (formerly known as Nautilus). Recent development efforts have focused heavily on improving the file manager’s search capabilities, making it easier to locate documents, media files, and folders across increasingly large storage volumes.
For many Linux users, file search has become one of the most important daily workflows. As personal data collections grow and SSDs make local storage faster than ever, GNOME developers are investing in tools that help users find information more quickly and efficiently. GNOME Files already relies on indexing technologies such as Tracker (now GNOME LocalSearch) to deliver fast results, and recent improvements are building on that foundation.
A Redesigned Search Experience
One of the most noticeable improvements is a redesigned search interface that makes searching feel more integrated into the overall file management experience.
Recent GNOME development previews introduced:
A cleaner search popover
Inline result previews
Improved keyboard navigation
Faster access to search filters
Better visibility of search options within the file manager interface
These refinements reduce the number of clicks required to narrow down results and help users locate files without leaving their current workflow.
Smarter Filtering Options
Search filters have become increasingly important as users store larger collections of documents, images, videos, and audio files.
GNOME Files has been expanding its filtering capabilities, allowing users to narrow searches more effectively based on:
File type
Media category
Search location
Recent activity
Indexed metadata
Earlier updates expanded support for additional audio and video file formats, making it easier to locate multimedia content directly from the search interface. This is particularly useful for users managing large media libraries.
Improved Search Performance
Fast search results are just as important as accurate ones.
GNOME Files continues leveraging the GNOME indexing framework to provide near-instant search results while minimizing system overhead. The file manager works closely with the LocalSearch indexing service to locate files quickly without repeatedly scanning entire drives.
This approach provides several benefits:
Faster file discovery
Reduced CPU usage during searches
Better scalability on large storage volumes
More responsive user experience
For desktop users who frequently work with thousands of files, these performance gains can significantly improve productivity.